
A guide to locating pigeon entry points and choosing exclusion measures around active warehouse loading bays in Kuwait.
Observe the bay with the door open and closed
Pigeons may enter while a driver waits at an open bay or through a fixed gap above the door after it closes. Record the time and bay number, then watch from a safe position to see where birds land first. If droppings collect under an interior beam, photograph the beam and the likely entry route.
Distinguish outside perches from indoor entry points
A fixed ledge above a loading canopy may suit stainless steel spikes after the mounting surface is checked. A permanent opening used to reach indoor beams may suit fitted netting. Review the full door travel, sensors and lighting with the facility manager before agreeing on the barrier location.
When the door needs to stay open for operations
Ask the shift supervisor when the door needs to open and when it can close under site procedures. Treating the upper ledge may discourage perching while the open doorway still gives birds a way inside. If one bay is affected, compare it with the adjacent bays before extending the scope.
What the installation quote should show
Ask for an annotated photo showing the fixing points, the gaps covered and how maintenance staff will reach them. Coordinate work with the loading team. Tell the installer if birds or an active nest are present in a cavity before it is closed. Ask for written details of the cleaning scope and installation warranty.
Check the bay after handover
Have the bay operator run the door under normal site procedures and confirm that the route stays clear. Check side gaps and access to equipment. On the next shift, record whether pigeons return to the same spot or move to a nearby beam or doorway.
Reference on pigeon exclusion and ledge deterrents
Bird control services · Request a free site inspection on WhatsApp · 99022134